Ankermake
Refurbished products come from customer returns, demo units, transport damages, open boxes etc...
All refurbished units have been tested and are verified to work properly. All Accessories (original or comparable substitutes), shall be in the package and if there is something missing we write this under "Refurbish notes". All refurbished products sold by 3D-Prima also include a 6 months warranty.
Outer packaging can be different than the original one. There can also be some scratches or marks on the product since it have been opened and used.
If there are any differences or damage that differs from a new device, it is mentioned below.
Refurbish notes: Some small marks on the chassis and on the build surface. All accessories included. Printer Tested Works as intended
Ankermake is back with precise prints at high speed. Utilizing PowerBoost 2.0 technology and a lightweight extruder, M5C delivers printing speeds of up to 500 mm/s while maintaining 0.1 mm precision, so you can create quality models faster and more efficiently. Whether you're a DIY enthusiast, designer, or engineer, this 3D printer lets you confidently unleash your creativity and bring your concepts to life with exceptional quality.
M5C supports 49-point automatic bed leveling, a hassle-free one-piece design for effortless installation, and power and filament outage recovery functions. It's also easy to remove the PEI flexible magnetic plate, offering a seamless printing experience for beginners.
Through Wi-Fi and Bluetooth connectivity, you are able to remotely control the printer, monitor the status of your prints, and transfer sliced models directly from your mobile device. The user-friendly AnkerMake app is easy to use for beginners and pros alike.
With a full-metal hotend capable of heating up to 300℃ and high-precision stainless steel dual Z-axis lead screws, this 3D printer provides long-lasting stability and quality prints.
AnkerMake M5C supports a range of nozzle sizes to suit your printing needs. With a 0.2 mm nozzle, it supports a layer thickness of 0.1 mm, resulting in a Ra value of 5 and a maximum height difference of 30 μm. Normal 3D print settings use a 0.4 mm nozzle with a layer thickness of 0.2 mm, resulting in a Ra value of 12 and a maximum height difference of 50 μm.
Go from heating, to extrusion and cooling in record time with 35 mm³/s extrusion flow.
The integrated base and Z-axis module keeps the machine on stable low-vibration mode, always.
Ei hintahistoriaa saatavilla
Refurbished products come from customer returns, demo units, transport damages, open boxes etc...
All refurbished units have been tested and are verified to work properly. All Accessories (original or comparable substitutes), shall be in the package and if there is something missing we write this under "Refurbish notes". All refurbished products sold by 3D-Prima also include a 6 months warranty.
Outer packaging can be different than the original one. There can also be some scratches or marks on the product since it have been opened and used.
If there are any differences or damage that differs from a new device, it is mentioned below.
Refurbish notes: Some small marks on the chassis and on the build surface. All accessories included. Printer Tested Works as intended
Ankermake is back with precise prints at high speed. Utilizing PowerBoost 2.0 technology and a lightweight extruder, M5C delivers printing speeds of up to 500 mm/s while maintaining 0.1 mm precision, so you can create quality models faster and more efficiently. Whether you're a DIY enthusiast, designer, or engineer, this 3D printer lets you confidently unleash your creativity and bring your concepts to life with exceptional quality.
M5C supports 49-point automatic bed leveling, a hassle-free one-piece design for effortless installation, and power and filament outage recovery functions. It's also easy to remove the PEI flexible magnetic plate, offering a seamless printing experience for beginners.
Through Wi-Fi and Bluetooth connectivity, you are able to remotely control the printer, monitor the status of your prints, and transfer sliced models directly from your mobile device. The user-friendly AnkerMake app is easy to use for beginners and pros alike.
With a full-metal hotend capable of heating up to 300℃ and high-precision stainless steel dual Z-axis lead screws, this 3D printer provides long-lasting stability and quality prints.
AnkerMake M5C supports a range of nozzle sizes to suit your printing needs. With a 0.2 mm nozzle, it supports a layer thickness of 0.1 mm, resulting in a Ra value of 5 and a maximum height difference of 30 μm. Normal 3D print settings use a 0.4 mm nozzle with a layer thickness of 0.2 mm, resulting in a Ra value of 12 and a maximum height difference of 50 μm.
Go from heating, to extrusion and cooling in record time with 35 mm³/s extrusion flow.
The integrated base and Z-axis module keeps the machine on stable low-vibration mode, always.