Xtool
| Use innovative dual laser technology to combine two laser beams into one spot. The compressed spot has higher power, higher cutting ability, faster speed and better effect under the same electric power. The power of 10W dual laser xTool D1 is equivalent to a single laser 15W laser cutting machine. |
* Limited by the characteristics of the material itself, the semiconductor laser (blue laser) can only cut dark acrylic materials.
No coating needed - Faster speed - Darker engraved pattern
| Engraving / Cutting accuracy to reach 0.004 inches | Repositioning accuracy down to less than 0.007 inches. |
| Easy Focus Adjustment Only take 3 steps to adjust the focus in 5 seconds. Pull down the original focus lever, slide the laser slider to make the focus lever close to the material's surface, recover the focus lever. |
Super powerful 20W laser beam oxidizes the metallic surface in an instant, bringing vivid colors to the engraved metal.
| Limit switches will trigger the alarm if the laser head is about to hit the boundary of the machine in All Directions. |
The emergency stop will be triggered by the detection of flames, smoke and tipping.
| Get started quickly with our user-friendly software: XCS Updating Project Files Batch Processing with Circular Array Default Working Parameters for Materials |